In recent years, Bodywel electric bikes have been increasing their popularity and influence in the market. By constantly innovating and optimising its products, improving product quality and service level, it has won the trust and praise of cycling enthusiasts.
Here are some riding tips applicable to Bodywel e-bikes:
Daily City Commuting Riding
1. Pre-departure inspection:
Before each ride, check the appearance of the Bodywel e-bike around the vehicle to see if there are any loose or damaged parts. Focus on checking the tyre pressure, you can use the tyre pressure gauge to inflate the tyre according to the standard value in the vehicle manual to ensure that the tyre rolls normally and has good grip; at the same time, gently squeeze the brakes to feel the braking force, to make sure that the braking system is sensitive and effective, and to ensure the safety of cycling.
2. Planning routes:
Use mobile phone map navigation, give priority to routes with bike lanes, avoid traffic congestion and reduce waiting time at red lights, which can save energy and improve commuting efficiency. If there are steep slopes on the way, learn about the power performance of Bodywel models in advance, like the F20PRO equipped with high-power motors to cope with steep slopes is relatively easy, you can reasonably plan the climbing route.
3. Riding posture adjustment:
Sit on the seat of Bodywel e-bike, adjust it to the right height, with your feet on the ground smoothly and knees slightly bent. Hold the handlebar with both hands, keep relaxed, elbows slightly bent, use the adjustable handlebar (some models) to find the most comfortable hand support position, reduce the fatigue of long time riding.
4. Reasonable use of power assist mode:
According to the road conditions and physical strength, switch the power assist mode of Bodywel e-bike flexibly. When you are on a flat road or going downhill, you can appropriately reduce the power assist and rely on the inertia to glide and save power; when you encounter a headwind, climb a slope or when you are not strong enough, you can turn up the power assist to move forward easily. The F20SE’s 7-speed power system can accurately adapt to different cycling scenarios.
Outdoor Leisure Riding
1. Vehicle Preparation:
If you are going to ride in the countryside or in the mountains, make sure that all parts of your Bodywel e-bike are in good condition before you set off. Especially for wide tyre models, check the depth of tyre tread and replace them in time if they are badly worn to ensure the grip on unpaved roads; also carry spare inner tubes, pumps and multi-functional repair tools to cope with possible emergencies such as flat tyres.
2. Equipment selection:
Wear professional riding helmets, goggles, gloves, riding clothes and knee and elbow pads to protect your body in all aspects. Choose waterproof and breathable clothes to prevent the outdoor weather from affecting your riding comfort. For example, the bright appearance of Bodywel e-bike with a set of bright-coloured outdoor cycling equipment is both safe and fashionable.
3. Understand the terrain and route planning:
Study the terrain of your riding destination in advance, and if you are riding in the mountains, familiarise yourself with the gradient and curve distribution of the route. For complicated terrain, you can use the powerful power and excellent shock absorption system of Bodywel models such as the M275 to conquer steep slopes and rugged mountain roads; and plan routes along streams and among mountains to enjoy the natural scenery.
4. Riding rhythm control:
In the process of outdoor riding, don’t be in a hurry and keep a stable riding rhythm. When climbing, lean forward slightly, shift the centre of gravity to the front of the bike, use the low gear and large torque output of Bodywel e-bikes, and slowly and continuously make power; when going downhill, control the speed, lower the speed of the brakes to avoid overheating of the brakes caused by long braking, and make full use of the vehicle’s handling performance to pass the corners safely.
Night Riding
1. Light check:
Before riding, make sure the headlight, tail light and turn signal of Bodywel e-bike are all on normally. The headlight should be bright enough to illuminate the road 10-15 metres in front of you to ensure that you can see the road conditions and obstacles clearly; the tail light should be kept on to warn the vehicles behind you to keep their distance, and reflective strips can be affixed to the bodywork, helmet, and backpack to improve the visibility at night.
2. Equipment visibility
enhancement: Wear clothing with reflective elements, such as reflective vests, reflective arm sleeves, etc., with fluorescent yellow and orange colours. Wear goggles with anti-fog function to prevent fog from affecting your vision at night and make yourself visible in the darkness, which complements the lighting system of Bodywel e-bike.
3. Riding speed control:
Due to limited visibility at night, reduce your riding speed to about 2/3 of the daytime speed to allow more time for emergencies. Always watch out for potholes, missing manhole covers and other hidden dangers on the road, use the light to anticipate in advance, pass through intersections cautiously, and pay attention to traffic signals and vehicle-pedestrian dynamics.
Zusammenfassung:
Bodywel adheres to the concept of ‘making travelling better’, and is committed to providing consumers with high-quality, high-performance, convenient and comfortable e-bikes to meet the travel needs of different groups of people in urban commuting, leisure and recreation scenarios, as well as to advocate green and environmentally friendly travel. If you are looking for a brand new e-bike for your travelling, you can visit Bodywel’s official website for more details!