In the past ten years, e-bikes have completely changed urban commuting by fusing fitness, sustainability, and convenience. Bodywel e-bikes stand out among the various alternatives available because of their dependable performance and user-friendly design. E-bikes are expensive, though, and if appropriate usage is not followed, they can break down can cost ebike commuters much repair fees. It’s critical to grasp the proper use techniques and how to start and stop these motorcycles in order to guarantee optimal durability. You can safeguard the electrical controls and batteries of your e-bike by following the instructions in this tutorial.
Bodywel offers three types of lithium battery ebike to power the ebike lights and motors, each requiring a distinct approach to open and upkeep. To discover exactly how to utilize it, go to the section that corresponds to your model.
A26, F20 se, F20
A275, M275, F20 pro
T16
Non-Concealed Battery: Bodywel A26, F20 se, F20
The Bodywel A26, F20 se, F20 all three models are non-concealed batteries, the batteries are located under the seat and held in place by the battery rails. Each battery comes with a unique key that can be used to lock the battery to prevent theft. Let’s check how to maintain these ebikes with removable battery.
Pre-start checklist
A thorough pre-start check is essential before you set off on your Bodywel e-bike. Firstly, make sure your battery is correctly fitted and fully locked into the rails and tray. The battery can be removed by twisting the key to align the first mark in the top right corner. Aligning the second mark locks the battery, at which point the battery’s catch will twist out to snap onto the track. This not only prevents theft, but also prevents the battery from shifting out of position and disconnecting during the ride, preventing damage to the battery and track from deformation.
Switching on the Bodywel battery
Turn the battery on by twisting the key to neutral aligning the bottom switch symbol. At this point the battery’s catch is still stuck to the track, ensuring that the battery is securely locked in place. You can check the battery level by long-pressing the button on the battery. A full charge is displayed as two green and one red. Activate the battery and display by long-pressing the power button on the left handlebar of the Bodywel ebike. When the battery is fully charged, you can see three white bars, one orange bar, and one red bar lit up on the display. As the battery level decreases, the lights on the battery bar turn off from right to left. The process is simple, but it can be a little confusing for first time users.
It is also important to use the correct ebike charger to keep the battery in good condition.The Bodywel A26, F20 se use 36 volt ebike batteries and the F20 uses 48v battery for ebike.There is a slight difference in battery specification between each model so Bodywel do not recommend cross chargers and only use the original charger.The Bodywel A26, F20 se use 36V batteries and the F20 uses 48V batteries.There is a slight difference in battery specification between each model so Bodywel do not recommend cross chargers, only the original charger.
Switching off the Bodywel battery
Long press the left handlebar power button to switch off. Take a break in the middle of the ride and the battery will automatically switch off after 15 minutes of not operating the button and riding.
After switching off, you can lock the battery in the car according to the above key usage, or you can take the battery to a safe location for storage.
Embedded Battery: Bodywel A275, M275, F20 pro
Bodywel A275, M275, F20 pro all three models have recessed batteries which are located in the frame. Again, each battery comes with a unique key that can be used to lock the battery to prevent theft.
Pre-start checklist
Before you set off on your Bodywel e-bike, make sure your battery is installed correctly and fully locked into the rails and tray without wobbling. Lock the battery with the key after placing it in the battery compartment. This prevents theft and also prevents the battery from wobbling during your ride.
Switching on the Bodywel Battery
After placing the battery in place, press the switch on the battery from I to O to turn the battery on. Activate the battery and display by long-pressing the power button on the left handlebar of the Bodywel ebike.
The Bodywel A275, M275, uses a 36V battery and the F20 pro uses a 48V battery. Again, Bodywel recommends that you use the original charger.
Switching off the Bodywel battery
Long press the left handle power button to switch off. The battery will automatically switch off if you take a break in the middle of a ride and do not operate the keys or ride for 15 minutes.
After switching off, you can lock the battery in the car according to the above key usage, or you can take the battery to a safe location for storage.
Non-removable battery: Bodywel T16
The Bodywel T16’s batteries are non-removable, with the batteries located in the frame above the rear wheels. Such a battery is less prone to damage and has a higher anti-theft factor due to the reduced battery loading and unloading process. Although this cheap ebike under 500 is good for some consumers, it will cost a certain amount of money to repair the battery if it breaks, so please use the battery correctly according to the guide.
Switching on the Bodywel Battery
The battery and display can be activated by long pressing the power button on the left handlebar of the Bodywel ebike. If there is a malfunction, the display will show the corresponding fault code and Bodywel engineers will help you to solve the problem.
Switch off the Bodywel battery
Long press the left handle power button to turn off. If you stop riding midway and neither press the keys nor ride for 15 minutes, the battery will switch off automatically.
Best Practices for Battery Care and Maintenance
Proper care will keep your e-bike battery performing and reliable for years. Here are, in detail, best practices to maintain and extend the life of a lithium batter:
Avoid extreme temperatures
Lithium-ion batteries are vulnerable to temperature changes. Never store your ebike in a location with extreme temperatures to avoid destroying the ebike—heat/cold. High temperatures will degrade capacity and the life years of a battery. On the other hand, very cold temperatures could reduce or affect the ability of the battery’s holding power. Ideally, store your Bodywel ebike in a climatically controlled environment where the temperature remains stable and moderate (0~40℃).
Post-Ride Charging Protocol
It is always best to let the battery cool down after a ride and then charge it. As mentioned earlier, if your battery is hot from riding, charging it right away can further wear down its cells. Use original charger for ebike, waiting at least 30 minutes to an hour after your ride to charge enables the battery to return to a normal temperature, which is safer for charging and can help prolong the life of the battery in general.
Regular checks for maintenance
– Visual Inspection: Check the case of the battery periodically for wear, cracks, or any other damage. The foreseen damage may expose the cells to environmental factors that could degrade their performance.
– Connections and Contacts: The connections and contacts shall be checked for any signs of corrosion or dirt accumulation. These can be very carefully cleaned with a dry cloth or with some kind of cleaning agent suitable for the electronic components. Poor contacts may cause inefficient charging and put a drag on the battery.
– Battery charge levels: State of charge: Always keep your battery charged between 20% and 80%. Avoid keeping the charge to high or low for a very long time. This will stress the battery cells, leading to a reduction in their lifespan. If you are storing the eBike for a long period, then store it with a charge of approximately 50% on the battery and charge again every 3 months.
Advantages of Using Bodywel E-bikes
Bodywel e-bikes are just irresistible, with their very competitive prices and quality, not to mention the added value of convenience in making them stand out in the rather crowded electric bicycle market today. Here’s a closer look at the benefits that come with choosing a Bodywel e-bike:
Cost-Effective Options
Bodywel provides pocket-friendly e-bikes so many people can afford to ride green. With several models under $500, the ecobarrier of high-cost electric bikes is broken, providing an economic alternative to riding on an e-bike without losing quality. At such a price, the affordability make these Bodywel e-bikes real shiny attractions for students, casual riders, and first-time riders who are a little cautious about how they spend their money on a bit more expensive options.
High-Quality Construction
Though Bodywel e-bikes come pretty cheap, they never settle for low quality. Robust frames, flawless electricals, and efficient motors put them in contention with some of the more affordable segments while comparing favorably to some of the higher-end brands out there. Their commitment to quality has been such that riders are given both safety and a smooth riding experience, therefore enhancing value for money.
Conclusion In a nutshell, Bodywel electric bicycles are a giant step into the future of commuting around town: easy to use, affordable, and featuring high-quality construction. It is also important to understand how to start and shut off your e-bike properly and follow some of the recommended practices in battery care to maximize your e-bike performance and battery life but protect your investment. Whether it’s for getting to work, exploring city streets, or enjoying a laid-back ride, Bodywel e-bikes do offer a plausible and sustainable way to move around the city. Driven by innovation and customer satisfaction, Bodywel never stops pushing the boundaries on the potential of electric bicycles; hence, for both new and experienced riders alike who are after an economical yet eco-friendly alternative method of transport, bodywel will be an ideal choice. Bodywel gives way to the future of commuting: efficient and sustainable.
